2018
Άμφισσα, Ελλάδα || Amfissa, Greece

Project Description 

The house of the chieftain Panourgias in Amfissa dates back to the late 18th century, following the popular architecture of the region. It consists of a main two-story building and an extension on the first floor with a total area of ​​286.84m2, while the plot on which it is located is 1,034.27m2. Due to its problematic situation and after its inclusion in the NSRF program, there was a provision for its restoration, as well as its conversion into a Historical Information Center. The interventions for the reuse of the house had to be made with the consideration of its new use, while basic care had to be taken for its harmonization with the natural environment, preserving, to the extent possible, the primary elements of its construction.

Περιγραφή Έργου

Το σπίτι του οπλαρχηγού Πανουργιά στην Άμφισσα χρονολογείται από τα τέλη του 18ου αιώνα που ακολουθεί τη λαϊκή αρχιτεκτονική της περιοχής. Αποτελείται από μία κύρια διώροφη οικοδομή και από μία προσθήκη κατ΄επέκταση στον όροφο με συνολικό εμβαδό 286,84m2 ενώ το οικόπεδο στο οποίο βρίσκεται είναι 1.034,27m2. Λόγω της προβληματικής του κατάστασης και μετά από ένταξή του στο πρόγραμμα ΕΣΠΑ υπήρξε πρόβλεψη αποκατάστασής του, αλλά και μετατροπής του σε Κέντρο Ιστορικής Ενημέρωσης. Οι παρεμβάσεις για την επανάχρηση της οικίας έπρεπε να γίνουν με το σκεπτικό της νέας της χρήσης ενώ βασική μέριμνα έπρεπε να ληφθεί για την εναρμόνησή της στο φυσικό περιβάλλον διατηρώντας, στο βαθμό που ήταν εφικτό, τα πρωταρχικά στοιχεία της κατασκευής της.

Project Requirements 

The building had several peculiarities, with the type of stonework being one of them (sandstonework). The restoration of the building had to be designed and implemented in such a way as to highlight all the historical parts of the building and not to alter any of its elements. The interventions for its reuse had to be carried out in a way that would serve the new use and the required functionality as a historical information center, as well as the modern design requirements of static and seismic loads and with the resistance capacity provided for in the new regulations, without altering the character of the building.

Απαιτήσεις Έργου

Το κτίσμα είχε αρκετές ιδιαιτερότητες, με τον τύπο της λιθοδομής νααποτελεί μία από αυτές (αργολιθοδομή). Η αποκατάσταση του κτιρίου έπρεπε να σχεδιαστεί και να υλοποιηθεί με τέτοιο τρόπο ώστε να αναδειχθούν όλα τα χρονικά μέρη του κτιρίου και να μην αλλοιωθεί τίποτα από τα στοιχεία του. Οι παρεμβάσεις για την επανάχρησή του έπρεπε να γίνουν με τρόπο ώστε να εξυπηρετούν τη νέα χρήση και την απαιτούμενη λειτουργικότητα ως κέντρο ιστορικής ενημέρωσης, καθώς και τις σύγχρονες απαιτήσεις σχεδιασμού στατικών και σεισμικών φορτίων και με την ικανότητα αντοχής που προβλέπονται στους νέους κανονισμούς, χωρίς να αλλοιώνουν το χαρακτήρα του κτίσματος.

SIKA's solution 

The restoration requirements were met by integrating modern needs into the traditional shell by strengthening the load-bearing structure (inorganic matrix method - in Greece it has been applied in very few constructions and on a much smaller scale) and by using the same materials originating from the region so that the building is fully harmonized with its natural environment and contains as much as possible the wisdom and truth of its original construction. Sika's integrated masonry reinforcement & seismic upgrade system gave new life to the building, serving the needs of the most compatible intervention possible to the load-bearing structure. 

Sika's system consists of the 1-component mortar SikaMonoTop®-722 Mur, with particularly good workability and thixotropy, in accordance with EN 998-1 (GP) and EN 998-2 (M20) for applications in masonry. The mortar incorporates the special SikaWrap®-350 G Grid glass mesh, resistant to alkalis and with high tensile strength in both directions. The special SikaWrap® FX-50 C carbon fiber cords are used as a connector to anchor the system to the substrate. The study provided for a double layer of the system on the bottom (ground floor) and a single layer on he top (upper floor). The resins Sikadur ® -52 LP and Sika ® Anchorfix-3+ were also used.

Η λύση της SIKA

Οι απαιτήσεις αποκατάστασης ικανοποιήθηκαν με την ένταξη των σύγχρονων αναγκών στο παραδοσιακό κέλυφος με ενίσχυση του φέροντος οργανισμού (μέθοδο ανόργανης μήτρας - στην Ελλάδα έχει εφαρμοστεί σε ελάχιστες κατασκευές και σε πολύ μικρότερη κλίμακα) και με χρήση ίδιων υλικών που προέρχονται από την περιοχή ώστε το κτίσμα να εναρμονίζεται πλήρως με το φυσικό του περιβάλλον και να εμπεριέχει όσο είναι εφικτό την σοφία και την αλήθεια της αρχικής κατασκευής του. Το ολοκληρωμένο σύστημα ενίσχυσης & σεισμικής αναβάθμισης τοιχοποιίας της Sika έδωσε νέα πνοή στο κτίσμα, εξυπηρετώντας τις ανάγκες της όσο το δυνατόν πιο συμβατής επέμβασης στο φέροντα οργανισμό.

Το σύστημα της Sika αποτελείται από το 1-συστατικού κονίαμα SikaMonoTop®-722 Mur, με ιδιαίτερα καλή εργασιμότητα και θιξοτροπία, σύμφωνο με το ΕΝ 998-1 (GP) και ΕΝ 998-2 (Μ20) για εφαρμογές σε τοιχοποιίες. Στο κονίαμα ενσωματώνεται το ειδικό υαλόπλεγμα SikaWrap®-350 G Grid, ανθεκτικό σε αλκάλια και με υψηλή εφελκυστική αντοχή και προς τις 2 διευθύνσεις. Τα ειδικά κορδόνια από ίνες άνθρακα SikaWrap® FX-50 C χρησιμοποιούνται ως σύνδεσμος για την αγκύρωση του συστήματος στο υπόστρωμα. Η μελέτη προέβλεπε διπλή στρώση του συστήματος στο κάτω μέρος (ισόγειο) καιμονή στο άνω (άνω όροφος). Επίσης χρησιμοποιήθηκαν οι ρητίνες Sikadur ® -52 LP και Sika ® Anchorfix-3+.

 
Συμμετέχοντες στο έργο Participants in the project:

Ιδιοκτήτης || Owner
Δήμος Δελφών

Συνεργείο Εφαρμογής || Applicators
ΔΟΜΗΣΗΣ ΤΕΧΝΙΚΗ Ε.Π.Ε.

Διαβάστε περισσότερα || Read more
 
 

Προϊόντα & συστήματα που χρησιμοποιήθηκαν || Products & systems used

Σύστημα ενίσχυσης τοιχοποιίας || Masonry reinforcement system

Sika MonoTop®-722 Mur
SikaWrap®-350 G Grid
SikaWrap® FX-50 C
Sikadur®-52 LP
Sika® AnchorFix®-3+

Μπορεί επίσης να σας ενδιαφέρουν || You may also be interested in

  

  

Γραφτείτε στο newsletter μας: